IS Series Single-Stage Centrifugal Pump: Application Range, Features, and Advantages
Release time:
2025-07-04
The IS series single-stage centrifugal pump is a widely used general-purpose pump designed in compliance with international standards (ISO 2858). It features a simple structure, stable performance, and broad applicability. Below are its application range, key features, and advantages.
I. Application Range
Fluid Type
Suitable for pumping clean water or liquids with similar physical/chemical properties (non-corrosive, free of solid particles).
Temperature range: ≤80°C (standard model); high-temperature models available for hotter fluids (custom design required).
Applications
Industrial water supply and cooling systems.

Urban water supply, drainage, and firefighting systems.
Agricultural irrigation and sprinkler systems.
HVAC systems.
Low-pressure liquid transfer in chemical and light industries (ensure fluid compatibility).
Flow & Head
Flow range: 6.3–400 m³/h.
Head range: 5–125 m.
Operating pressure: ≤1.6 MPa (standard models).
II. Product Features
Standardized Design
Complies with ISO 2858, ensuring uniform installation dimensions and interchangeability for easy maintenance.
Simple & Robust Structure
Single-stage, single-suction design with axial inlet and radial outlet.
Rear pull-out design allows access to impeller and seals without disassembling pipelines.
High Efficiency & Energy Saving
Hydraulically optimized impeller design ensures high efficiency and low energy consumption.
Flexible Sealing Options
Standard mechanical seals (single or double) or packing seals, adaptable to different working conditions.
Drive Method
Typically direct-coupled to electric motors (can also be coupled to other power sources via adapters).
Material Options
Main wetted parts made of cast iron (HT200); stainless steel or corrosion-resistant materials available upon request.
III. Key Advantages
Easy Maintenance
Rear pull-out design simplifies inspection and repair, minimizing downtime.
Smooth Operation
Stable bearing support ensures low vibration, low noise, and extended service life.
Wide Adaptability
Adjustable speed, impeller diameter, or materials allow customization for diverse needs.
Cost-Effective
Low initial purchase cost and high operational efficiency reduce overall lifecycle expenses.
Flexible Installation
Standardized flange connections support horizontal or vertical mounting (model-dependent).
IV. Considerations
Fluid Limitations: Not suitable for high-viscosity, highly corrosive, or slurry-containing liquids (specialized pumps required).
Cavitation Risk: Ensure sufficient NPSHa (Net Positive Suction Head available) to prevent cavitation damage.
High-Temperature Use: Thermal expansion must be considered; cooling systems may be needed for high-temperature fluids.
Conclusion
The IS series single-stage centrifugal pump is a reliable and efficient choice for low-pressure liquid transfer, particularly for clean water and similar fluids. Proper selection based on flow, head, fluid properties, and environmental conditions is essential. Custom solutions are available for specialized requirements.
Latest News
dustrial Shell & Tube Heat Exchanger for Pump & Valve Circulation Systems
Our shell and tube heat exchangers are ideal to pair with pumps and valves in closed-loop circulation systems. Built for high pressure and high temperature, with a wide range of material choices to handle corrosive industrial fluids.
2026-10-22
Shell and Tube Heat Exchanger, Supporting Pumps & Valves for Industrial Heat Transfer System
Shell and tube heat exchanger, also known as tubular heat exchanger, is widely used for industrial heating, cooling and condensation. It consists of shell, tube bundle, tube sheet and flanged end covers. One medium flows inside the tubes while the other flows in the shell side, achieving heat exchange without cross-contamination.
2026-10-22
Removable Plate Heat Exchanger | Matching Pumps & Valves for Process Heat Transfer Packages
Our plate heat exchangers are widely matched with industrial pumps and valves for complete circulating heat transfer systems. Multiple corrosion-resistant materials are optional, featuring high thermal efficiency and easy disassembly for cleaning. Custom design is available for your chemical, heating and cooling projects.
2026-10-22
Plate heat exchangers are often combined with industrial pumps and pipeline valves to form a complete heat exchange system. They are easy to disassemble and clean with corrosion-resistant material options. Suitable for chemical industry, heating, waste heat recovery and other working conditions. Custom selection is available according to working parameters.
2026-10-22